Because there are thousands of types, there are more than a hundred types of business, and there are more than a hundred categories. This cannot be told in detail with you, and it cannot be written. It can be said that there are only storage shelves, and it is an ordinary storage shelves. The high -end automated stereo library is not enough to write a book. The quality standards for warehousing shelves, from bearing, design, specifications, craftsmanship, ingredients, etc. The weight load: depends on your needs, because according to different loads, the shelves are divided into light shelves, medium shelves, and heavy shelves. Different specifications have different designs and specifications. This load is the weight that the standard four -layer shelves can withstand each layer. Light shelves generally bear about 100-180 kg, medium-sized shelves generally bear about 200-350 kg, and heavy shelves generally carry more than 500 kg. The higher the load, the higher the quality requirements, and of course the quality is better, but you can put some things and buy a rack with a load -load -bearing of 500 kg. If you pursue quality, you can choose the highest medium shelves. After all, the light shelf market is too chaotic and too mixed, especially on the Internet, dare to mark it, but the quality is estimated to collapse thirty kilograms. The brand shelves of large factories also have the safety factor in their own target load, some are 1.2, some are 1.3, and individual big brands are 1.6 and higher, that is, the weight of the load of 1.6 times the weight of the nominal is 1.6 times, and there will be no safety and danger in the short term. It may cause some deformation in the long run, but it is guaranteed to cause an accident without collapse. At present, I know that only the Hergris brand can meet such standards in the north, and there are three or four in the south to meet this standard. If design: At present, the domestic market design standards are particularly chaotic. Many manufacturers have made light shelves C -type steel butterfly holes in a medium -sized shelves or even heavy shelves. They do not look at the safety factor at all. Of course, there are also individual large factories, big brands, and the design standards of traditional heavy or even overweight (load -bearing one ton) shelves are used to use heavy shelves and medium shelves. The most typical example is Hygris's mid -size shelves. Type steel columns and eagle mouth cards increase bold safety sales. Let's put it this way, U -shaped steel and C -type steel. Under the same thickness and height, the amount of steel for the U -shaped steel column is almost 1.3 times to 1.5 times that of the C -shaped steel column, and the structure safety is more than twice. In addition to the columns, in the horizontal support, the mid -size shelves of Higris also use the same 10 thick details on the super heavy shelves to strengthen the stainless steel screws, rather than the welding method of most manufacturers. Four times stronger, some manufacturers are welded with horizontal welding, and the two small solder points can be done with their hands. If specifications: It mainly depends on the thickness of the materials of various components (no pure steel before painting, many manufacturers use the thickness of the paint after painting), good quality columns are generally 0.4 light shelves, 0.6 0.6, 0.6, 0.6, 0.6, 0.6 The medium -sized shelves are the lowest and lowest standards. In fact, theoretically light shelves should be 0.6, and the medium shelves are 0.8. Pay attention to the thickness of other parts of the materials. Of course, the pillars are the most critical parts of shelves. The main considerations should be considered. The thickness must be considered with the design structure. The U -shaped steel structure is generally better than the specifications of 0.8 mm thickness. More sinking, so many shelf manufacturers use C -shaped steel columns. Just now, easy to process, it looks thick, and the cost can be left one -third. In addition, the thickness of the paint must also be noted. The thickness of the 0.8 mm thick plate is about 1.2 after painting. Many manufacturers have a thickness after painting. It is 0.8 mm after the paint. In fact, 0.5 is good, and it is definitely not a good spray paint. The aspects: In fact, there are not much to say in this regard. The large manufacturers have good craftsmanship and strict quality control. What can be said is two, one is abandoned rust and removing rust, and the other is formed at one time. Large manufacturers, or strict quality manufacturers, abandoned rust removal is operated with dedicated pools, a row of pools, abandoned pools, rust -removing ponds, acid -base comprehensive pools, phosphorus pools, etc. After 40 minutes of soaking, the effect is satisfactory. The effect is satisfactory to the nearby water pond. It enters the next step in 40 minutes. If the effect is not satisfactory, it will be 40 minutes. Rinse water for 40 minutes after every step. So it takes more days or even more. Small factories, including some large factories, are sprayed in the production line. It will be done in half an hour. Is it the effect? It is estimated that only one -third of the soaking. Can't be handled, so life span can be imagined. I know, the only hundred factories I saw in the north are only the Hagris brand of Walker Metal, Hebei. There are still only three factories in the south. But now it has been changed to spray. After all, it saves more than one -third of time, and the cost is reduced by one -tenth. One molding is mainly testing machinery. Large manufacturers can buy high -end machinery. Bending for molding at different angles on the shelves to ensure the best state of retaining materials. Bending, seven or eight bending processing seven or eight times, causing too much metal fatigue and seriously affecting quality. The last material: High -quality cold rolling steel used in large manufacturers, small manufacturers, miscellaneous steels, or even steel. This is currently in the same peer, especially the most fraud on the Internet. Remember to chat online with the boss of a large factory in Nanjing last week. It is not worth the price of the steel money of Baosteel, and even the price is less than half of the price of the steel. Do you do n’t want to make money by his peers. They have all started public welfare. The cost of the cost of raw materials is used as the price of the finished product. All costs such as factory costs and other costs will be paid for in vain? I also talked about the incident with the Walker Metal Manager in Hebei. He said that they absolutely used good cold -rolled steel, but their medium -sized shelves that also supported many of them. Two times, the performance of their online sales is very bleak. I was curious to search online. At that time, the Hergoris mid -size shelves were more than 600 yuan a set of specifications at the time, and the peers had 299. Their manager said that in order to take online sales, the profit is more than 500. This is the cost price, but it is not possible to compete with each other. This phenomenon is indeed a big problem in the shelf industry. It is worth thinking about. There are many manufacturers in our country, including the Nanjing and Hebei. , But they have become problems now. In order to survive, they mainly rely on exports, because foreigners buy things first look at the quality and then look at the price. Both of these two foreign trade have done very well, especially Walker, Hebei, Europe, and the US market has made many large projects and high -end. Which medium -sized shelves I look at, domestic sales abroad, the same standards, the same warehouse, and the same batch of goods are better than domestic and better. I remember that the manager was very depressed at the time that he was considering whether it was to meet the needs of domestic customers and produced a group of low -quality and low -price products that meet domestic demand. And which boss in Nanjing has also said similar words. Although there are export support now, the two have only thoughts, and the so -called domestic quality products that they do n’t want to do have reduced costs that they do n’t want to produce, but what about in the future?
Because there are thousands of types, there are more than a hundred types of business, and there are more than a hundred categories. This cannot be told in detail with you, and it cannot be written. It can be said that there are only storage shelves, and it is an ordinary storage shelves. The high -end automated stereo library is not enough to write a book.
The quality standards for warehousing shelves, from bearing, design, specifications, craftsmanship, ingredients, etc.
The weight load: depends on your needs, because according to different loads, the shelves are divided into light shelves, medium shelves, and heavy shelves. Different specifications have different designs and specifications. This load is the weight that the standard four -layer shelves can withstand each layer. Light shelves generally bear about 100-180 kg, medium-sized shelves generally bear about 200-350 kg, and heavy shelves generally carry more than 500 kg. The higher the load, the higher the quality requirements, and of course the quality is better, but you can put some things and buy a rack with a load -load -bearing of 500 kg. If you pursue quality, you can choose the highest medium shelves. After all, the light shelf market is too chaotic and too mixed, especially on the Internet, dare to mark it, but the quality is estimated to collapse thirty kilograms. The brand shelves of large factories also have the safety factor in their own target load, some are 1.2, some are 1.3, and individual big brands are 1.6 and higher, that is, the weight of the load of 1.6 times the weight of the nominal is 1.6 times, and there will be no safety and danger in the short term. It may cause some deformation in the long run, but it is guaranteed to cause an accident without collapse. At present, I know that only the Hergris brand can meet such standards in the north, and there are three or four in the south to meet this standard.
If design: At present, the domestic market design standards are particularly chaotic. Many manufacturers have made light shelves C -type steel butterfly holes in a medium -sized shelves or even heavy shelves. They do not look at the safety factor at all. Of course, there are also individual large factories, big brands, and the design standards of traditional heavy or even overweight (load -bearing one ton) shelves are used to use heavy shelves and medium shelves. The most typical example is Hygris's mid -size shelves. Type steel columns and eagle mouth cards increase bold safety sales. Let's put it this way, U -shaped steel and C -type steel. Under the same thickness and height, the amount of steel for the U -shaped steel column is almost 1.3 times to 1.5 times that of the C -shaped steel column, and the structure safety is more than twice. In addition to the columns, in the horizontal support, the mid -size shelves of Higris also use the same 10 thick details on the super heavy shelves to strengthen the stainless steel screws, rather than the welding method of most manufacturers. Four times stronger, some manufacturers are welded with horizontal welding, and the two small solder points can be done with their hands.
If specifications: It mainly depends on the thickness of the materials of various components (no pure steel before painting, many manufacturers use the thickness of the paint after painting), good quality columns are generally 0.4 light shelves, 0.6 0.6, 0.6, 0.6, 0.6, 0.6 The medium -sized shelves are the lowest and lowest standards. In fact, theoretically light shelves should be 0.6, and the medium shelves are 0.8. Pay attention to the thickness of other parts of the materials. Of course, the pillars are the most critical parts of shelves. The main considerations should be considered. The thickness must be considered with the design structure. The U -shaped steel structure is generally better than the specifications of 0.8 mm thickness. More sinking, so many shelf manufacturers use C -shaped steel columns. Just now, easy to process, it looks thick, and the cost can be left one -third. In addition, the thickness of the paint must also be noted. The thickness of the 0.8 mm thick plate is about 1.2 after painting. Many manufacturers have a thickness after painting. It is 0.8 mm after the paint. In fact, 0.5 is good, and it is definitely not a good spray paint.
The aspects: In fact, there are not much to say in this regard. The large manufacturers have good craftsmanship and strict quality control. What can be said is two, one is abandoned rust and removing rust, and the other is formed at one time. Large manufacturers, or strict quality manufacturers, abandoned rust removal is operated with dedicated pools, a row of pools, abandoned pools, rust -removing ponds, acid -base comprehensive pools, phosphorus pools, etc. After 40 minutes of soaking, the effect is satisfactory. The effect is satisfactory to the nearby water pond. It enters the next step in 40 minutes. If the effect is not satisfactory, it will be 40 minutes. Rinse water for 40 minutes after every step. So it takes more days or even more. Small factories, including some large factories, are sprayed in the production line. It will be done in half an hour. Is it the effect? It is estimated that only one -third of the soaking. Can't be handled, so life span can be imagined. I know, the only hundred factories I saw in the north are only the Hagris brand of Walker Metal, Hebei. There are still only three factories in the south. But now it has been changed to spray. After all, it saves more than one -third of time, and the cost is reduced by one -tenth. One molding is mainly testing machinery. Large manufacturers can buy high -end machinery. Bending for molding at different angles on the shelves to ensure the best state of retaining materials. Bending, seven or eight bending processing seven or eight times, causing too much metal fatigue and seriously affecting quality.
The last material: High -quality cold rolling steel used in large manufacturers, small manufacturers, miscellaneous steels, or even steel. This is currently in the same peer, especially the most fraud on the Internet. Remember to chat online with the boss of a large factory in Nanjing last week. It is not worth the price of the steel money of Baosteel, and even the price is less than half of the price of the steel. Do you do n’t want to make money by his peers. They have all started public welfare. The cost of the cost of raw materials is used as the price of the finished product. All costs such as factory costs and other costs will be paid for in vain? I also talked about the incident with the Walker Metal Manager in Hebei. He said that they absolutely used good cold -rolled steel, but their medium -sized shelves that also supported many of them. Two times, the performance of their online sales is very bleak. I was curious to search online. At that time, the Hergoris mid -size shelves were more than 600 yuan a set of specifications at the time, and the peers had 299. Their manager said that in order to take online sales, the profit is more than 500. This is the cost price, but it is not possible to compete with each other. This phenomenon is indeed a big problem in the shelf industry. It is worth thinking about. There are many manufacturers in our country, including the Nanjing and Hebei. , But they have become problems now. In order to survive, they mainly rely on exports, because foreigners buy things first look at the quality and then look at the price. Both of these two foreign trade have done very well, especially Walker, Hebei, Europe, and the US market has made many large projects and high -end. Which medium -sized shelves I look at, domestic sales abroad, the same standards, the same warehouse, and the same batch of goods are better than domestic and better. I remember that the manager was very depressed at the time that he was considering whether it was to meet the needs of domestic customers and produced a group of low -quality and low -price products that meet domestic demand. And which boss in Nanjing has also said similar words. Although there are export support now, the two have only thoughts, and the so -called domestic quality products that they do n’t want to do have reduced costs that they do n’t want to produce, but what about in the future?
You can go to the wholesale market. The general wholesale market will be available
There are many people selling this on the streets outside Dao.
It is more convenient to buy online