1. Create a new layer, named the ring, and pull out an ellipse with the elliptical frame selection tool and fill in white. 2, loading the selection of the layer "ring", select-modify-shrinkage 6px-delete. Then load the selection of the layer "ring", the filter-blur-Gaussian vague-3 cancel the selection. 3, double -click the layer "ring", add a slope and relief style. 4, select the layer "ring", press the ALT key left button, and merge all copies into a layer. 5, copy layer, flip vertically, move to the right position, change transparency, name the reflection, add mask, brush it with a pen, and move the layer to the lower layer of the ring. You can also add text to make text-rotation-create text deformation, add internal shadow and projection to text.
1. First draw a ring, draw a ring, and use the elliptical frame tool to draw a circle in the ring and delete. 2, enter the channel, load into the constituency. After the new channel is built, it is white in the constituency. Then do not cancel the constituency. 3, use the light effect, load the "texture channel" Alpha1, Alpha1 is the newly -built channel before. Note: Do not move the layer before using the channel, otherwise the location will be different! 4, this is the effect of using the light effect, and some say that the relief effect can be achieved. Of course, there are many ways. You like it. 5, then use Ctrl M to use the curve. This effect can also be adjusted out of the "gloss" in the relief after using the relief effect. It is similar to the nature of the curve. 6, click "Movement Tools", be sure to click! Then press Alt to add left direction keys. 7, input text (text on the ring). 8, deformation of text, please select "Gong". 9. Press Ctrl T free transformation and place it in a suitable position. 10, change the text to gray, delete style, and then layer style, select the relief effect, the parameters are as shown in the figure below: 11, start drawing diamonds. 12, the layer style is still the relief effect. There is also the pattern superimposed. Select the pattern like the pattern. First, put the picture you want to put the position, then select the "pattern superimposed", select a pattern as shown in the figure, and then select the "slope and relief" as shown in the figure as shown in the figure. Settings, you can also use your own feelings. Finally, you can refer to the previous steps. Use "radial blur. 13. After completion, copy the two small ones on both sides. Filter -blur -radial blur, the parameters are as shown below: 15, the effect may not be too obvious after the radial blur, you can press CTRL F several times, then press Ctrl L to light up with the color order to light up it slightly, One point. 16, the same method to do other text on the ring. 17, complete.
This tutorial introduces the production method of the golden ring. Draw the rough shape of the ring first, and then fill the color. Pay attention to the order of the layer. Coupled with the appropriate layer style to make the surface texture. Final effect . Create new images and build a vector ellipse filling layer with shape tools. The image effects and layers are as follows 2 figures. . The vector mask of this layer is out of the display state. Use the path to select the path to copy the path, and use the free transformation tool to reduce it appropriately. Finally change it to the way to subtract. If you have any questions about these steps, please refer to the content of the text tutorial#12. After the effect and layer tuning, select two layers and rotate it 45 degrees. The effect is as shown below. . Copy the layer out one out, change the fill color to black, and move the way to subtract the way to form a similar figure below. The layer adjustment board is shown below. If the filled black overflows around, it can slightly shrink the black filling layer. . The following layer style is set on the rings above, which are inner shadows, inner light, slope and relief, shadows, equal high lines, luster, gradient superimposed. If the angle rotating before, the angle value can be changed accordingly to maintain the effect. 5. Set the gradient style as shown in the figure below for the black filling layer. When setting, drag in the image to control the effect of gradient. // 3353
1. Create a new layer, named the ring, and pull out an ellipse with the elliptical frame selection tool and fill in white.
2, loading the selection of the layer "ring", select-modify-shrinkage 6px-delete. Then load the selection of the layer "ring", the filter-blur-Gaussian vague-3 cancel the selection.
3, double -click the layer "ring", add a slope and relief style.
4, select the layer "ring", press the ALT key left button, and merge all copies into a layer.
5, copy layer, flip vertically, move to the right position, change transparency, name the reflection, add mask, brush it with a pen, and move the layer to the lower layer of the ring. You can also add text to make text-rotation-create text deformation, add internal shadow and projection to text.
1. First draw a ring, draw a ring, and use the elliptical frame tool to draw a circle in the ring and delete.
2, enter the channel, load into the constituency. After the new channel is built, it is white in the constituency. Then do not cancel the constituency.
3, use the light effect, load the "texture channel" Alpha1, Alpha1 is the newly -built channel before. Note: Do not move the layer before using the channel, otherwise the location will be different!
4, this is the effect of using the light effect, and some say that the relief effect can be achieved. Of course, there are many ways. You like it.
5, then use Ctrl M to use the curve. This effect can also be adjusted out of the "gloss" in the relief after using the relief effect. It is similar to the nature of the curve.
6, click "Movement Tools", be sure to click! Then press Alt to add left direction keys.
7, input text (text on the ring).
8, deformation of text, please select "Gong".
9. Press Ctrl T free transformation and place it in a suitable position.
10, change the text to gray, delete style, and then layer style, select the relief effect, the parameters are as shown in the figure below:
11, start drawing diamonds.
12, the layer style is still the relief effect. There is also the pattern superimposed. Select the pattern like the pattern. First, put the picture you want to put the position, then select the "pattern superimposed", select a pattern as shown in the figure, and then select the "slope and relief" as shown in the figure as shown in the figure. Settings, you can also use your own feelings. Finally, you can refer to the previous steps. Use "radial blur.
13. After completion, copy the two small ones on both sides. Filter -blur -radial blur, the parameters are as shown below:
15, the effect may not be too obvious after the radial blur, you can press CTRL F several times, then press Ctrl L to light up with the color order to light up it slightly, One point.
16, the same method to do other text on the ring.
17, complete.
This tutorial introduces the production method of the golden ring. Draw the rough shape of the ring first, and then fill the color. Pay attention to the order of the layer. Coupled with the appropriate layer style to make the surface texture. Final effect
. Create new images and build a vector ellipse filling layer with shape tools. The image effects and layers are as follows 2 figures.
. The vector mask of this layer is out of the display state. Use the path to select the path to copy the path, and use the free transformation tool to reduce it appropriately. Finally change it to the way to subtract. If you have any questions about these steps, please refer to the content of the text tutorial#12. After the effect and layer tuning, select two layers and rotate it 45 degrees. The effect is as shown below.
. Copy the layer out one out, change the fill color to black, and move the way to subtract the way to form a similar figure below. The layer adjustment board is shown below. If the filled black overflows around, it can slightly shrink the black filling layer.
. The following layer style is set on the rings above, which are inner shadows, inner light, slope and relief, shadows, equal high lines, luster, gradient superimposed. If the angle rotating before, the angle value can be changed accordingly to maintain the effect.
5. Set the gradient style as shown in the figure below for the black filling layer. When setting, drag in the image to control the effect of gradient. // 3353